Fundamental Geometrical Concepts

(i) A line segment AB is a fixed portion of a line. It starts at point A and stops at point B.

∴ A line segment AB has 2 end points.

(ii) How many end points does a ray AB have?

A ray AB has a fixed starting point (the endpoint A) but extends infinitely in the direction of point B.

∴ A ray AB has one endpoint.

(iii) How many end points does a line AB have?

A line AB extends infinitely in both directions. Since it never stops, it has no starting or ending points.

∴ A line AB has no end points.

(i) $\overrightarrow{AB}$

A ray starts at point A and extends infinitely in the direction of B. Because it never ends, we cannot measure its total length.

∴ It does not have a definite length.

(ii) $\overleftrightarrow{AB}$

A line extends infinitely in both directions and it has no beginning and no end.

∴ It does not have a definite length.

(iii) $\overline{AB}$

A line segment is the part of a line that connects two specific points (A and B). Because it is bounded by these two endpoints, it has a fixed, measurable distance.

∴ It has a definite length.

There is exactly one unique line that can connect two distinct fixed points. If we try to draw another straight line through both P and Q, it will simply lie directly on top of the first one.

∴ Only one line can be drawn to pass through two given fixed points P and Q.

A single point acts like a center or a pivot. We can draw lines through it in every possible direction (360°) and since there is no second point to "lock" the line's direction, we can keep drawing them forever.

∴ Infinitely many lines can be drawn to pass through a given point.

If P is our initial point, we can shoot a ray out from it in any direction since there are an infinite number of directions in a plane.

∴ Infinitely many rays can be drawn with P as initial point.

To draw this line segment, place a ruler on a piece of paper. Mark a point A at 0 cm and another point B at the third small division after the 5 cm mark. Connect these two points with a straight line.

∴ AB = 5.3 cm.

Collinear (P, Q, R): Draw a single straight line and place points P, Q, and R anywhere along that same line.

Non-collinear (X, Y, Z): Place points X and Y on a line, but place point Z somewhere else so it does not sit on the line connecting X and Y. These points will form a triangle if connected.

(i) By definition, collinear points are points that lie on the same straight line.

∴ One line can be drawn through three collinear points.

(ii) Non-collinear points are a set of three or more points that do not lie on the same straight line.

∴ Three lines can be drawn through three non-collinear points not on the same line.

Maximum is 3.
This occurs when no two lines are parallel and all three lines do not pass through the same point. Each line intersects the other two at two distinct points, forming a triangle.

Minimum is 0.
This occurs when all three lines are parallel to each other (L1 || L2 || L3). Since they never cross, there are zero points of intersection.

∴ Maximum points = 3, Minimum points = 0.

From a single point, a line can be drawn in any direction, so infinitely many lines are possible.

Hence, option 4 is the correct option.

When two planes meet, their common part is always a straight line.

Hence, option 2 is the correct option.

Parallel lines always remain at equal distance and never intersect.

Hence, option 2 is the correct option.

Only one unique straight line can pass through two fixed points.

Hence, option 2 is the correct option.

Intersecting lines cross each other at exactly one point.

Hence, option 2 is the correct option.

(i) A point has no dimensions.

(ii) A line segment extended endlessly in one direction is called a ray.

(iii) The points lying on the same line are said to be collinear.

(iv) The point at which three or more lines lying in a plane, intersect is called the point of concurrence.

(v) A smooth flat surface which extends endlessly in all the directions is called a plane.

(i) True
Reason — Any two points in space can always be connected by a single unique straight line. Therefore, they are always collinear by default.

(ii) True
Reason — A line is defined as extending infinitely in both directions. Since it never stops, it cannot have any endpoints.

(iii) True
Reason — A ray has one starting point but extends infinitely in the other direction.

(iv) False
Reason — Two lines in a plane only intersect if they are not parallel. Parallel lines stay at the same distance apart and will never meet.

(v) True
Reason — While many lines can pass through a single point, once we have two fixed points, they "lock" the direction, allowing only one unique straight line to pass through both.

(1)

Lines p and n are running side-by-side and maintain the same distance apart. They are parallel lines, so they will never intersect. All other pairs (p and q, l and n, m and l) clearly cross each other at some point.

Hence, option 2 is the correct option.

(2)

Concurrent lines are three or more lines that all pass through the exact same point. In the diagram, lines q, m, and p all meet at a single shared intersection point in the center-right area.

Hence, option 4 is the correct option.

(3)

Lines n and p are drawn such that they will never meet, no matter how far they are extended. Therefore n and p are parallel lines.

Hence, option 2 is the correct option.

(4)

The intersection of q and n is a single point. Based on the fundamental rules of geometry, an infinite number of lines can be drawn through any single point in a plane.

Hence, option 4 is the correct option.

Both Assertion (A) and Reason (R) are true and Reason (R) is the correct explanation of Assertion (A).

Explanation

Figure l has arrows on both ends, which is the geometric symbol for a line (extending infinitely).

Figure AB has two distinct endpoints, which is the definition of a line segment. So, the Assertion is true.

The statement in Reason is mathematically correct definition of a line segment and it perfectly explains why AB is called a line segment.

Hence, option 1 is the correct option.

Assertion (A) is false but Reason (R) is true.

Explanation

Concurrent lines must all pass through the same single point. In the figure, the lines intersect at three different points (A, B, and C), forming a triangle. Therefore, they are not concurrent.
The Assertion is false.

If three lines are not parallel and not concurrent, they intersect at exactly 3 points (A with B, B with C, and C with A). This is the maximum possible.
The Reason is true.

Hence, option 4 is the correct option.

To answer this question, let us recall the definitions:

A line segment is the straight path between two fixed end points and has a definite length. It is shown without any arrows.

A line is a line segment extended endlessly in both directions. It has no end points and is shown with arrows at both ends.

A ray is a line segment extended endlessly in one direction. It has one end point and is shown with an arrow at one end only.

Now, observing the given figure:

TV has arrows extending in both directions (beyond T and beyond V). So, TV is a line.

TU is drawn between the points T and U without any arrows extending beyond them. So, TU is a line segment.

UV is drawn between the points U and V without any arrows extending beyond them. So, UV is a line segment.

Hence, option 1 is the correct option.

To answer this question, let us recall the definition:

Two lines having a common point are called intersecting lines. Two lines in a plane which have no common point are called parallel lines.

Now, observing the given figure:

The figure contains 4 lines in total — 2 horizontal lines and 2 vertical lines.

Let us name the two horizontal lines as h₁ and h₂, and the two vertical lines as v₁ and v₂.

The two horizontal lines (h₁ and h₂) are parallel to each other, so they do not intersect.

The two vertical lines (v₁ and v₂) are also parallel to each other, so they do not intersect.

However, each horizontal line intersects each vertical line. The pairs of intersecting lines are :

(i) h₁ and v₁

(ii) h₁ and v₂

(iii) h₂ and v₁

(iv) h₂ and v₂

So, the total number of pairs of intersecting lines = 4.

Hence, option 3 is the correct option.